Carmel Software Releases HVAC Refrigerant Charging App for the Android
We recently released this app onto the Android Marketplace, and the response has far exceeded our expectations.
San Rafael, CA
February 1, 2012
February 1, 2012
Contact: Masha O'Brien
It also includes the following features:
- Perform superheat refrigerant charge calculations for 75 different refrigerants. Input the indoor wet-bulb and outdoor dry-bulb temps. to get the target superheat temperature. Then, specify the suction line temperature and pressure to get the actual superheat temperature. The difference tells you whether to charge or not.
- Perform subcool refrigerant charge calculations for 75 different refrigerants. Input the indoor wet-bulb and outdoor dry-bulb temps. to get the target subcool temperature. Then, specify the liquid line temperature and pressure to get the actual subcool temperature. The difference tells you whether to charge or not.
- Use an interactive slider control to increase or decrease all values and immediately observe calculated results. Also, the slider control allows for "incremental" changes so you can ever-so-slightly change values to observe newly calculated results.
- Specify atmospheric pressure (other than standard 14.7 psi) so that calculated pressures are adjusted for high elevations like those in Denver and elsewhere.
- Customize input types so that you can specify manufacturer-specified target superheat/subcool or input indoor dry-bulb/indoor relative humidity in place of indoor wet-bulb temperature.
- Send an email of all inputs and results with custom message
- Display input and result values in either English or Metric units
- Change the color scheme of the app so that it can easily be viewed outdoors in direct sunlight
- It is "Bluetooth aware", meaning that it will connect via Bluetooth to those PT gauges that are also Bluetooth enabled. This will allow the automatic transfer of temperature/pressure information from those gauges to the HVAC Refrigerant Charge app.
About Carmel Software
Carmel Software Corporation has been a leader in HVAC design software since 1995. In fact, our software currently powers the analysis capabilities of Autodesk's (makers of AutoCAD) 3D modeling software tools. Also, ASHRAE, Mitsubishi Electric, Trane, PECI, U.S. Department of Energy, Honeywell, DNV GL, Carrier, large western utilities, and other Fortune 500 building-services companies rely upon Carmel to develop custom mobile and desktop applications for their clients. We currently offer more than 40 HVAC mobile apps for iOS and Android powered devices.
Media Contact: Masha O'Brien, Phone: 800-339-6030